Description
SEM Model Electric forklift (2, 2.5, 3, 3.5-ton)
Unique Electrical Features:
OPSS (Operator Presence Sensing System):
When the driver leaves the seat, the movement of the forklift and mast automatically stops.
Regenerative Braking System:
This system recharges the battery and prevents energy loss. When the gear is shifted to the opposite direction of movement, or the driver lifts their foot off the accelerator pedal, or presses the brake pedal, the electronic system applies braking via the drive motor. In these cases, the motor switches to generator mode and charges the battery until the forklift comes to a complete stop.
Safety Systems:
ATSL (Automatic Truck Speed Limitation) System: Prevents the forklift from overturning during movement and turning.
ARB and ARD Safety Systems: If the forklift stops on a slope and the brake system is not engaged, the device uses battery power and motor operation to remain stationary for a few seconds. After this delay, the forklift slowly moves down the slope until it reaches a flat surface or encounters an obstacle that stops the vehicle, preventing potential damage.
Operator Seat Safety System:
Prevents forklift movement if the operator leaves the seat.
Intelligent System for Automatic Shutdown:
Automatically shuts down the forklift when the engine, controller, inverter, or main contactor temperature rises beyond safe limits.
Load Drop Prevention System:
Prevents the load from dropping in case of hydraulic hose rupture.
Specifications | Model | SEM20 | SEM25 | SEM30 | SEM35 |
Rated capacity | 2000 | 2500 | 3000 | 3500 | |
Battery capacity(V,AH) | 80 V / 560 AH | ||||
Battery weight(Kg) | 1500 | ||||
Forklift Weight(kg) | 4660 | 4780 | 5440 | 5560 | |
Performances | Travel Speed (no Load/Full Load, Km/h) | 18/16 | 17.5/15.5 | 17.2/14.5 | |
Lifting Speed (No Load/ Full Load, mm/s) | 490/480 | 490/360 | |||
Lowering Speed (No Load/ Full Load, mm/s) | 460/490 | ||||
Engine Output(kw) | 2*10 | ||||
Hydraulic Pump Motor Power(kw) | 16.5 |